Construction Chemicals
How does this product compare to traditional plaster in terms of weight?
It significantly reduces building weight; a 10mm application weighs about 18 kg/m², compared to 33 kg/m² for traditional plaster at 15mm, reducing weight by approximately 45%.
How should the product be prepared and applied?
Ready for use but can be diluted with 2-3% water if needed. Spray onto the surface, level with a steel-edged spatula, apply a second coat if necessary, and finish with a topcoat.
What should be done if work needs to be paused?
For short pauses, immerse the spray gun in water and cover the remaining plaster with a thin layer of water. Remove excess water before resuming.
How do you clean tools and equipment after use?
Clean tools and equipment with water immediately after use to prevent hardening.
What are the environmental considerations of this product?
Eco-friendly with low odour and fast drying properties, suitable for indoor use without significant air quality disruption.
What is Terraco Fine Spray Plaster?
Terraco Fine Spray Plaster is a spray-applied surface preparation compound for internal walls and ceilings, part of the Sprayplaster™ system, offering advantages over traditional plastering methods in weight and application speed.
What surfaces can Terraco Fine Spray Plaster be applied to?
It can be applied to concrete, aerated lightweight concrete, sand cement render, and fair-face concrete, suitable for both precast and conventional building structures.
What are the environmental benefits of using Terraco Fine Spray Plaster?
The product is environmentally friendly, with zero volatile organic compounds (VOCs), solvent-free, and water-based, aligning with sustainable building practices.
How does the weight of Terraco Fine Spray Plaster compare to traditional plaster?
It reduces building weight, weighing approximately 18 kg/m² at 10mm thickness compared to traditional plaster's 33 kg/m² at 15mm, resulting in a 45% weight reduction.
What are the available finishes for Terraco Fine Spray Plaster?
Available finishes include Sprayplaster BC (basecoat) for levelling and Sprayplaster FC (finish coat), an acrylic-based compound for a smooth final surface.
Can Terraco Fine Spray Plaster be used for fast-track projects?
Ideal for fast-track projects due to its quick application process and efficiency, making it a preferred choice for builders.
How does Terraco Fine Spray Plaster contribute to cost savings in construction?
Contributes to cost savings by reducing labour time and material weight, lowering overall project costs, and minimizing the need for extensive structural support.
What is the Saint-Gobain Weberanc 405 BFX Epoxy Anchoring Resin?
The Weberanc 405 BFX is a two-component high-strength pure epoxy chemical anchoring resin designed for heavy load applications, particularly effective for anchoring rebar and studs in solid concrete.
What are the key features of Weberanc 405 BFX?
Key features include being solvent-free, odourless, exhibiting no shrinkage, and suitable for both dry and wet concrete, including flooded holes and corrosive environments.
What is the working time and curing time for this product?
Working time varies with temperature: 120 minutes at 5°C to 6 minutes at 45°C. Minimum curing time is approximately 90 minutes in dry concrete at 45°C, doubling for wet conditions.
What is the compressive strength of Weberanc 405 BFX?
The compressive strength is over 55 MPa after 7 days, ensuring robust performance under heavy loads.
Can Weberanc 405 BFX be used in high temperatures?
Suitable for use in elevated temperatures and rated for temperature ranges I, II, and III.
Is Weberanc 405 BFX safe for potable water applications?
Safe for potable water applications, enhancing its usability in water system construction projects.
What certifications does Weberanc 405 BFX have?
Holds ETA 15/0185 certification for rebar connections, confirming compliance with European technical assessments.
What are the recommended applications for Weberanc 405 BFX?
Recommended for rebar anchoring, threaded rod and stud anchoring in concrete, and applicable in horizontal, vertical, and overhead applications.
Please, mind that only logged in users can submit questions