Construction Chemicals
Are there any specific cleaning instructions for tools used with this adhesive?
Clean tools and surfaces with a suitable solvent, like acetone or a dedicated PVC cleaner; cured adhesive can only be removed by scraping.
What is Weberep 331 TX?
Weberep 331 TX is a non-shrink, thixotropic repair mortar designed for concrete applications.
What are the main applications of Weberep 331 TX?
It is suitable for repairing concrete surfaces, including honeycombing, edges of steps, and load-bearing situations. It also restores and reinforces weakened structures.
What are the key properties of Weberep 331 TX?
It is characterized by its non-shrinking nature, high strength, good resistance to seawater and high-sulfate environments, and thixotropic consistency.
What is the recommended thickness for application?
The recommended application thickness is between 5 mm and 50 mm in one coat. For thicknesses exceeding 50 mm, apply in two layers.
How should the surface be prepared before applying Weberep 331 TX?
The surface must be cleaned of damaged concrete, laitance, and contaminants, and saturated with water before applying the mortar.
What is the curing process for Weberep 331 TX?
Cure the exposed surface by spraying with cool water for three days or using curing compounds.
What is the pot life of Weberep 331 TX after mixing?
The pot life after mixing is one hour, depending on temperature and site conditions.
What are the compressive strength values for Weberep 331 TX?
The compressive strength is approximately 20 MPa after one day, 40 MPa after seven days, and 55 MPa after 28 days.
What is Weberep 360 FFR?
Weberep 360 FFR is a dry pre-mixed cementitious paste designed for fair-face concrete applications, available in white and light grey.
What are the main applications of Weberep 360 FFR?
It is used for smoothing and repairing concrete surfaces, providing a smooth finish for wall applications and enhancing the aesthetic quality of fair-face concrete.
What are the key technical specifications of Weberep 360 FFR?
It is a polymer-modified cementitious coating mixed with water and applied on clean, sound surfaces free from contaminants.
How should Weberep 360 FFR be mixed and applied?
Mix the paste vigorously with water until homogeneous. Moisten the substrate in hot weather and use cool water if the temperature exceeds 35°C.
What are the curing requirements for Weberep 360 FFR?
Cure with clean water for at least three days, spraying twice a day for proper hydration.
Can Weberep 360 FFR be used in extreme weather conditions?
It can be applied in various conditions but should not be used on overheated or frozen surfaces. Protect from direct sunlight and extreme temperatures.
What tools are recommended for applying Weberep 360 FFR?
Use trowels and spatulas for application, and clean tools with water immediately after use.
Is Weberep 360 FFR environmentally friendly?
The product is formulated to minimize environmental impact, but specific certifications or assessments should be consulted for detailed eco-friendliness information.
What is Terraco Spray Plaster Basecoat?
Terraco Spray Plaster Basecoat is a spray-applied, polymer-modified cementitious plaster for levelling and rectifying irregularities on interior surfaces.
What are the main applications of this product?
It is used for solid surfaces like precast concrete, aerated concrete, sand/cement, and fair-faced brickwork, applied in multiple coats for thickness.
What is the maximum thickness allowed for application?
The maximum application thickness is 10mm, with up to 5mm per layer.
Please, mind that only logged in users can submit questions