Construction Chemicals
Can M Seal be painted after it cures?
Yes, once M Seal has fully cured, it can be painted. This allows for aesthetic integration into various applications where appearance matters.
What surfaces can M Seal adhere to?
M Seal is versatile and can bond to a variety of surfaces, including ferrous and non-ferrous metals, ceramics, glass, wood, leather, and certain plastics. This makes it suitable for a wide range of repair and sealing tasks.
Are there any special instructions for using M Seal?
Proper substrate preparation is crucial for optimal results. Surfaces should be cleaned of rust, dust, and grease, and it is recommended to abrade them before application. Mixing should be done promptly after combining the resin and hardener.
Is M Seal resistant to chemicals and moisture?
Yes, the cured M Seal exhibits good resistance to moisture, mild acids, and alkalis, making it suitable for use in environments where exposure to such conditions is likely.
What safety precautions should be taken when using M Seal?
You should avoid prolonged contact with the mixed putty on your skin and should not add solvents or excess hardener to the mix, as this can affect the setting time and effectiveness. Proper ventilation is also recommended during use.
What is Webercol Fix Tile Adhesive?
Webercol Fix Tile Adhesive is a ready-mix, cement-based adhesive designed for bonding tiles to various substrates. It is suitable for both internal and external applications, including floors and walls.
What are the key features of this adhesive?
This adhesive offers excellent bonding strength, water resistance, and a low VOC content. It also has anti-slip properties and is compatible with a wide range of ceramic tiles and granites.
What is the recommended application thickness?
The recommended thickness for applying Webercol Fix is between 2 to 10 mm, depending on the tile size and substrate conditions.
How long does it take for the adhesive to set?
The initial setting time is approximately 15 minutes, with a full curing time of 24 hours before grouting. It can withstand light foot traffic after 24 to 48 hours.
What is the coverage area for a 20 kg bag?
A 20 kg bag of Webercol Fix typically covers an area of about 3 to 7 m², depending on the substrate and the thickness of the application.
Can Webercol Fix be used on all surfaces?
No, it is not suitable for use on gypsum walls, wooden floors, or existing ceramic tiles. It is best applied on clean, solid surfaces like concrete and cementitious plasters.
What is the pot life of the adhesive?
The pot life of Webercol Fix is approximately 4 hours when stored in the shade, allowing ample time for application before it begins to set.
How should the adhesive be mixed for use?
For a 20 kg bag, mix 4 to 4.8 litres of clean water until a uniform, lump-free paste is achieved. It is recommended to use an electric mixer with a low rotation speed for the best results.
What is Fevicol Super Glue made of?
Fevicol Super Glue is a cyanoacrylate-based adhesive, known for its strong bonding capabilities on various materials.
What surfaces can Fevicol Super Glue bond?
This glue is effective on wood, glass, ceramic, leather, and most plastics, making it versatile for different applications.
How much glue is in each tube?
Each tube contains 3 grams of adhesive, which is suitable for small repairs and bonding tasks.
How quickly does Fevicol Super Glue set?
Fevicol Super Glue is designed to provide an instant bond, allowing for quick repairs without long wait times.
Is Fevicol Super Glue waterproof?
While it provides a strong bond, it is recommended to avoid exposure to water for prolonged periods as it may weaken the bond over time.
Can Fevicol Super Glue be used for outdoor applications?
It is primarily intended for indoor use, but it can withstand some outdoor conditions. For outdoor applications, a more specialized adhesive may be recommended.
How should Fevicol Super Glue be stored?
The glue should be stored in a cool, dry place, away from direct sunlight, and tightly sealed to prevent it from drying out.
Please, mind that only logged in users can submit questions