Construction Chemicals
What is Mapei Adesilex P7?
Mapei Adesilex P7 is a high-performance cementitious adhesive with no vertical slip for ceramic and porcelain tiles. It is used for interior and exterior bonding.
What is Fosroc Nitobond used for?
Fosroc Nitobond is ideal for bonding new concrete or mortar to existing concrete surfaces, both horizontally and vertically. Applications include:
Floor toppings: Creating bonded or granolithic floor toppings.
Repairs: Bonding new repair materials ...
What are the benefits of using Fosroc Nitobond?
Fosroc Nitobond creates a strong and durable bond between new and existing concrete. It is suitable for both indoor and outdoor applications, ideal for areas with moisture or potential water exposure, and is easy to use with two-component pre-measured...
Do I need any special tools to use Fosroc Nitobond?
Essential tools for using Fosroc Nitobond include a mixing container, mixing drill with a mixing paddle, brush or spray equipment for applying the Nitobond, and appropriate safety gear (gloves, safety glasses, etc.).
How long does Fosroc Nitobond take to cure?
Curing time for Fosroc Nitobond can vary depending on temperature and humidity. Generally, lower temperatures will lead to slower curing times. Refer to the product instructions or technical datasheet for specific curing times.
Where can I buy Fosroc Nitobond?
Fosroc Nitobond EP 4L can be conveniently purchased on FEPY, the UAE's leading e-commerce platform for construction materials and tools.
What is Fosroc Conbextra GP?
Fosroc Conbextra GP is a high-flow, non-shrink, cementitious grout used for free-flow grouting of gap thicknesses between 10 and 75 mm. It comes pre-bagged and ready to use as a dry powder that blends cement, graded fillers, and chemical additives.
What are the key benefits of Fosroc Conbextra GP?
The key benefits of Fosroc Conbextra GP include non-shrink, high strength, ease of application by just adding water, being used in a flowable or trowelable consistency, and not segregating or bleeding.
What are the typical uses of Fosroc Conbextra GP?
Fosroc Conbextra GP has many uses, such as grouting stanchion baseplates, bedding pre-cast concrete panels, anchoring and reinforcing steel bars, and installing tie bars.
What is the mixing ratio for Fosroc Conbextra GP?
For a flowable consistency, 4.0 - 4.5 litres of water is added per 25kg bag of Fosroc Conbextra GP, yielding approximately 13.25 litres. For a trowelable consistency, 3.4 - 3.6 litres of water is added per 25kg bag, yielding approximately 12 litres.
What are the key technical specifications of Fosroc Conbextra GP?
Fosroc Conbextra GP conforms to BS EN 1504-3 Class R4 requirements and BS EN 1504-6 for anchoring reinforcing steel bars. It has an initial set time of approximately 6 hours.
What is Fosroc Supercast PC?
Fosroc Supercast PC is a concrete admixture for waterproofing, repair, and rehabilitation applications. It is a 25kg pack size of the Supercast PC product from Fosroc.
What are the key technical details of the Fosroc Supercast PC?
Fosroc Supercast PC is a crystalline waterproofing admixture that reacts with the by-products of cement hydration to form insoluble crystals, which block the passage of water through the concrete. It has a dimension of 25 x 25 x 15 cm. It can be used...
How is Fosroc Supercast PC used?
Fosroc Supercast PC 25 kg is added directly to the concrete mix during batching. The recommended dosage is 0.8-1.2% by weight of cement. It can be used in new concrete construction and repair existing concrete structures.
What are the benefits of using Fosroc Supercast PC?
Fosroc Supercast PC provides the following benefits:
- Waterproofs concrete by forming insoluble crystalline growth
- Reduces permeability and increases resistance to water penetration
- Enhances durability and service life of concrete structures
- ...
How does the Fosroc Supercast PC compare to other waterproofing admixtures?
Compared to other waterproofing admixtures, the Fosroc Supercast PC offers several advantages:
- It is a crystalline-based admixture, providing more effective and permanent waterproofing than traditional admixtures.
- It can be used in various applications...
What are the shelf life and storage requirements for Fosroc Supercast PC?
The shelf life of Fosroc Supercast PC is 12 months when stored in unopened original containers in a dry environment at temperatures between 5°C and 45°C. The product should be protected from direct sunlight and high humidity.
What is M Seal Multi-Purpose Sealant primarily used for?
M Seal Multi-Purpose Sealant is designed for sealing, joining, fixing, and building across various applications. It effectively fills gaps, cracks, and plugs leaks in pipes and joints, making it suitable for both household and industrial use.
What are the key components of M Seal?
M Seal consists of two parts: a resin and a hardener, which must be mixed in equal volumes. The resin is typically green, while the hardener is black, allowing users to easily identify when a uniform mix is achieved.
How long does it take for M Seal to set?
The working time for M Seal is approximately 15 to 20 minutes, with a setting time of 60 to 90 minutes. It hardens fully within 1 to 2 hours, depending on environmental conditions.
Please, mind that only logged in users can submit questions