Paint & Paint Accessories
What surfaces can I use Jotun Jollyfix on?
It can be used on cement plaster, concrete, brickwork, rendered surfaces, and gypsum boards.
How do I prepare the surface before painting?
The surface should be clean, dry, and free from dust, oil, grease, and loose particles. Light sanding is recommended before application.
What kind of primer should I use?
Jotun recommends using PVA Primer or Fenomastic Emulsion Primer as a base coat.
How many coats of paint do I need?
Two coats of Jotun Jollyfix are recommended for optimal coverage and finish.
What application methods are suitable for this paint?
The paint can be applied using a roller (recommended), brush (for corners and edges), or airless/conventional spray.
What's the drying time between coats?
A minimum of 8 hours is generally recommended before applying the next coat, but this can vary based on temperature, humidity, and ventilation.
What size is available?
Jotun Jollyfix comes in an 18L size on FEPY, ideal for larger rooms or projects.
What about the different colors, White and 0567 Ivory? Which one should I choose?
The paint is available in White and 0567 Ivory. Choose White for a bright white finish or 0567 Ivory for a warmer, off-white tone.
Are there any safety precautions I should take while using this paint?
Always refer to the instructions on the paint container and the Safety Data Sheet (SDS) for detailed health and safety precautions.
What type of paint is Jotun Durosan Action Matt?
Acrylic copolymer emulsion paint for interior use.
What surfaces can I use Jotun Durosan Action Matt on?
Cement plaster, concrete, blockwork, and rendered surfaces.
What sizes does Jotun Durosan Action Matt come in?
1 L, 4 L, 10 L, and 20 L.
What colours are available?
White and all interior colours in the Jotun Multicolor system.
What is the recommended film thickness per coat?
Dry film thickness: 20-25 µm; Wet film thickness: 50-70 µm.
How much coverage will I get per litre?
Theoretical spreading rate: 20-16 m²/l.
How do I dilute Jotun Durosan Action Matt?
Dilute with water at 50-60% ratio.
What are the ideal conditions for applying Jotun Durosan Action Matt?
Substrate temperature: minimum 10°C and at least 3°C above the dew point; good ventilation.
How long does it take for Jotun Durosan Action Matt to dry?
Drying times (assuming 50% relative humidity): 10°C: Surface (touch) dry in 12 hours, Hard dry in 16 hours, Dry to next coat in 12 hours. 23°C: Surface (touch) dry in 4 hours, Hard dry in 8 hours, Dry to next coat in 4 hours. 40°C: Surface (touch) dry...
How should I prepare the surface before painting?
The surface must be sound, clean, dry, and free from dust, oil, grease. Light sanding is recommended.
Do I need to use a primer with Jotun Durosan Action Matt?
Use a PVA Primer (I) before applying the paint.
Please, mind that only logged in users can submit questions