Construction Chemicals
What is Weberep 360 FFR?
Weberep 360 FFR is a dry pre-mixed cementitious paste designed for fair-face concrete applications, available in white and light grey.
What are the main applications of Weberep 360 FFR?
It is used for smoothing and repairing concrete surfaces, providing a smooth finish for wall applications and enhancing the aesthetic quality of fair-face concrete.
What are the key technical specifications of Weberep 360 FFR?
It is a polymer-modified cementitious coating mixed with water and applied on clean, sound surfaces free from contaminants.
How should Weberep 360 FFR be mixed and applied?
Mix the paste vigorously with water until homogeneous. Moisten the substrate in hot weather and use cool water if the temperature exceeds 35°C.
What are the curing requirements for Weberep 360 FFR?
Cure with clean water for at least three days, spraying twice a day for proper hydration.
Can Weberep 360 FFR be used in extreme weather conditions?
It can be applied in various conditions but should not be used on overheated or frozen surfaces. Protect from direct sunlight and extreme temperatures.
What tools are recommended for applying Weberep 360 FFR?
Use trowels and spatulas for application, and clean tools with water immediately after use.
Is Weberep 360 FFR environmentally friendly?
The product is formulated to minimize environmental impact, but specific certifications or assessments should be consulted for detailed eco-friendliness information.
What is Terraco Spray Plaster Basecoat?
Terraco Spray Plaster Basecoat is a spray-applied, polymer-modified cementitious plaster for levelling and rectifying irregularities on interior surfaces.
What are the main applications of this product?
It is used for solid surfaces like precast concrete, aerated concrete, sand/cement, and fair-faced brickwork, applied in multiple coats for thickness.
What is the maximum thickness allowed for application?
The maximum application thickness is 10mm, with up to 5mm per layer.
How does this product compare to traditional plaster in terms of weight?
It significantly reduces building weight; a 10mm application weighs about 18 kg/m², compared to 33 kg/m² for traditional plaster at 15mm, reducing weight by approximately 45%.
How should the product be prepared and applied?
Ready for use but can be diluted with 2-3% water if needed. Spray onto the surface, level with a steel-edged spatula, apply a second coat if necessary, and finish with a topcoat.
What should be done if work needs to be paused?
For short pauses, immerse the spray gun in water and cover the remaining plaster with a thin layer of water. Remove excess water before resuming.
How do you clean tools and equipment after use?
Clean tools and equipment with water immediately after use to prevent hardening.
What are the environmental considerations of this product?
Eco-friendly with low odour and fast drying properties, suitable for indoor use without significant air quality disruption.
What is Terraco Fine Spray Plaster?
Terraco Fine Spray Plaster is a spray-applied surface preparation compound for internal walls and ceilings, part of the Sprayplaster™ system, offering advantages over traditional plastering methods in weight and application speed.
What surfaces can Terraco Fine Spray Plaster be applied to?
It can be applied to concrete, aerated lightweight concrete, sand cement render, and fair-face concrete, suitable for both precast and conventional building structures.
What are the environmental benefits of using Terraco Fine Spray Plaster?
The product is environmentally friendly, with zero volatile organic compounds (VOCs), solvent-free, and water-based, aligning with sustainable building practices.
How does the weight of Terraco Fine Spray Plaster compare to traditional plaster?
It reduces building weight, weighing approximately 18 kg/m² at 10mm thickness compared to traditional plaster's 33 kg/m² at 15mm, resulting in a 45% weight reduction.
Please, mind that only logged in users can submit questions