Construction Chemicals
Is Polycoat environmentally friendly?
Polycoat is a water-based product that is non-toxic and environmentally friendly. It does not emit harmful fumes during application, making it safe for both indoor and outdoor use.
Can Polycoat be applied on damp surfaces?
Polycoat can be applied on damp substrates. However, the surfaces must be not waterlogged and be free from contaminants like oil or grease before application.
Can Ultracolor Plus be used in high-traffic areas?
Ultracolor Plus is suitable for high-traffic areas, including airports and shopping centres, due to its durability, resistance to wear, and ability to prevent efflorescence.
What is M Seal 100g Multi-Purpose Sealant?
M Seal 100g is a two-component epoxy putty used for sealing, joining, fixing, and insulating surfaces. It forms a tough and durable bond on materials such as metals, ceramics, wood, and certain plastics.
How do I use M Seal 100g?
To use M Seal, clean the substrate to remove dust or grease, then mix equal parts of the resin (green) and hardener (black) until a uniform colour is achieved. Apply within 5-10 minutes for optimal adhesion.
What safety precautions should be taken when using Polycoat?
While Polycoat is non-flammable and safe for indoor use, it is advisable to ensure proper ventilation during application. Additionally, users should avoid contact with skin and eyes; protective gear such as gloves and goggles is recommended.
How long does it take for Polycoat to set?
The firm set time for Polycoat is approximately 24 hours under standard conditions. However, drying times may vary depending on environmental factors such as temperature and humidity.
What are the key characteristics of Polycoat?
Polycoat is cold-applied, easy to use, and adheres well to multiple substrates including concrete, metal, and wood. It is water-based, non-toxic, and free from asbestos, making it safe for indoor use in confined spaces.
What are the primary applications of Polycoat?
Polycoat is primarily used for damproofing below-ground concrete structures, protecting built-up roofing systems, and serving as a moisture vapour barrier on block works and concrete surfaces. It can also be applied in wet areas like kitchens and bathrooms...
What is Henkel Polybit 15L Polycoat Cold Bitumen Emulsion?
Henkel Polybit 15L Polycoat is an emulsified thixotropic bitumen protective coating that dries to form a flexible, black protective film. It serves as a tough barrier against vapour transmission and is suitable for various applications, including waterproofing...
What is the setting time for M Seal 100g?
The setting time for M Seal 100g is approximately 60 minutes at room temperature (30°C). It can be handled after 1-2 hours of curing, depending on environmental conditions.
What are the key properties of M Seal 100g?
M Seal has excellent tensile strength (>200 kg/cm²), compressive strength (>400 kg/cm²), and flexural strength (>350 kg/cm²). It also has low water absorption (
Is M Seal 100g waterproof?
M Seal 100g is waterproof and provides a reliable seal against moisture, making it suitable for water supply lines and underwater repairs.
What safety precautions should I take when using M Seal?
The hardener may cause skin irritation. It is recommended to wear gloves during mixing and application, wash hands thoroughly after use, and avoid contact with eyes.
Can M Seal be painted over after curing?
Once fully cured, M Seal can be sanded and painted over, making it ideal for both functional and aesthetic repairs.
What is the shelf life of M Seal 100g?
M Seal has a shelf life of at least 12 months when stored in a cool and dry place in unopened packs. Proper storage conditions help maintain its effectiveness.
What is Mapei Ultracolor Plus?
Mapei Ultracolor Plus is a high-performance, polymer-modified cementitious grout designed for grouting joints from 2 to 20 mm wide, offering advanced technologies to resist mould growth.
What are the key technical characteristics of Ultracolor Plus?
It is classified as CG2WA according to EN 13888 standards, indicating high resistance to abrasion and low water absorption. It has a bulk density of 1,400 kg/m³ and a dry solids content of 100%, making it suitable for both internal and external use.
How should Ultracolor Plus be mixed and applied?
Ultracolor Plus should be mixed in a ratio of 100 parts grout to 21-23 parts water, achieving a fluid paste consistency. The mixture can be applied with a rubber trowel and has a pot life of 20-25 minutes at standard conditions.
What is the curing time for Ultracolor Plus?
The grout sets for light foot traffic in about 3 hours and is fully usable after 24 hours. For applications in basins or swimming pools, it may take up to 48 hours.
Please, mind that only logged in users can submit questions